Roller shutter & garage doors across Boksburg. Same-day callout, teams on the East Rand.

Two leaves, nothing overhead

Side-Hinged Garage Doors in Boksburg

Side-hinged garage doors swing outward on two leaves, like an oversized pair of gates. They suit workshops, storerooms and low garages where nothing can run overhead.

Pair of side-hinged garage doors with a matching pedestrian door
  • Steel, timber or aluminium leaves
  • Welded steel subframe, adjustable hinges
  • No headroom required

A side-hinged garage door opens outward on hinges like a pair of large doors. In Boksburg it is chosen for two reasons: the garage is used as a workshop or store and needs a door that can be opened partly, or the house calls for a traditional look that an overhead door cannot give it.

Side-hinged garage doors we supply in Boksburg

  • Steel side-hinged doors in ribbed and panelled profiles.
  • Timber side-hinged doors in hardwood or clad, for period elevations.
  • Unequal leaf pairs so one leaf works as a normal pedestrian door.
  • Glazed upper panels where the garage needs daylight.

Why a side-hinged door suits a workshop garage

You can open one leaf and walk in, which nobody does with an overhead door. On the older properties through Boksburg North, Cason and Comet where the garage has become a workshop or storeroom, that single fact usually decides it.

Space required in front of the opening

The leaves swing outward, so the driveway apron has to be clear. Where a driveway falls away from the garage or a vehicle parks close, the leaves will not open fully. We check the ground at survey, because this is the thing that catches people out.

Frames, hinges and hanging

The frame carries the whole load, and on a heavy timber pair that load is considerable. We fit a proper subframe anchored into the structure, with hinges rated for the leaf mass. A side-hinged door that drops at the leading edge has almost always been hung on an inadequate frame.

Locking and security

Multi-point locking into head and threshold on the leading leaf, and shoot bolts on the slave leaf. Locking a pair of doors at the centre only is what makes them easy to force.

Timber doors and Boksburg weather

Hardwood on a west-facing opening takes strong afternoon sun and then hard summer rain, and it needs a maintained finish to cope with the swing between them. We specify the timber and the sealing for that exposure and state the maintenance interval honestly, because a timber door that is not recoated will move and then it will not close.

Automating side-hinged garage doors

Possible with arm operators on each leaf, in the same way a swing gate is automated. It costs more than automating an overhead door and it needs the swing path permanently clear. We quote it where it is wanted and explain the trade-off.

Maintenance

Hinges, locking points and the finish, checked annually. On timber doors the finish is the maintenance item that decides the door’s life.

What a side-hinged garage door costs in Boksburg

Priced on opening size, leaf material, glazing, locking and whether a new subframe is needed. Timber costs more than steel and lasts well when it is looked after.

Common questions

About side-hinged garage doors

Roughly half the opening width in clear space in front of each leaf. Check for boundary walls, steps, paving edges and where cars actually park. If the driveway falls away steeply from the garage we set the leaves higher and use a threshold seal.

Yes, with a swing-arm operator on each leaf, the same type used on driveway gates. It works well but is slower than a roll-up motor and needs the swing area kept permanently clear. Most of our side-hinged customers stay manual.

Because the leaves were hung straight onto brickwork. We fit a welded steel subframe into the reveal first, square and plumb, and hang the leaves off that with adjustable hinges so the door can be trued up later.

Often, yes. If the frame is sound and square, new leaves cost a fraction of a complete door. Send a photo of the opening from outside and we will tell you which you are looking at.

Related

Also worth a look

Security Roller Shutter Doors

Bonded stores and high-value freight

Heavy-gauge shutters for bonded stores and high-value stock areas, with anti-lift locking, bolted bottom rail and alarm integration.

  • Anti-lift bottom rail with bolts
  • Alarm and access control integration

Industrial Roller Shutter Doors

Jet Park, Anderbolt, Bartlett

Heavy-duty galvanised shutters for the warehousing and freight belt around the airport, built for constant truck access and openings to 8 000mm.

  • Openings to 8 000mm wide
  • 0.8mm–1.2mm galvanised slat
  • Chain hoist or motorised

Perforated Roller Shutter Doors

Ventilated bays and workshop openings

Perforated curtains for workshops and bays that need extraction and airflow while the opening stays secured overnight.

  • Punched galvanised slat, mixed options
  • Openings to 6 000mm wide

Next step

Get a roller shutter door quote in Boksburg

Tell us the opening size and what the door has to do. We will give you a firm price for Boksburg and a date we can be on site.

Request a callback

Two working hours is our usual turnaround on callbacks.

In a hurry? 076 315 4219

Call now 0861 000 431 Emergency 24 hours Get a quote Free